ESE GENERAL STUDIES

ESE GENERAL STUDIES
ESE IES GENERAL STUDIES

IES GENERAL STUDIES NOTES

WE HAVE MADE EASY TO UNDERSTAND UPSC ENGINEERING SERVICES EXAMINATION ESE IES GENERAL STUDIES MATERIALS

SITE FOR UPSC IES PREPARATION

This blog is started to provide General Studies or general awareness course for various competitive examination in India like UPSC CSE,UPSC ESE,SSC,RRB,State PSCs etc.We are creating educational contents for helping student community.

We provide Most comprehensive and intensive ‘interactive’ online general studies course for UPSC Engineering Services Exam(ESE). Our strategy is to constantly innovate to keep the preparation process updated with trend of exam.We provide subjectwise material including each concept.Our GS Notes are Complete & covered with all relevant facts & analysis.



Showing posts with label upsc ies ese general studies gs question detailed solution. Show all posts
Showing posts with label upsc ies ese general studies gs question detailed solution. Show all posts

Friday, February 22, 2019

UPSC IES/ ESE 2019 Solutions (Prelims Exam)General Studies(GS) Paper1


IES/ ESE 2019 Solutions





http://esegeneralstudies.epizy.com





1. A committee of 4 is to be formed from among 4 girls and 5 boys. What is the probability that the committee will have number of boys less than number of girls? (A)2/9 (B)4/9 (C)4/5 (D)1/6 Ans:(D) 2. The solution of initial value problem: $\frac { \partial \mathrm { u } } { \partial \mathrm { x } } = 2 \frac { \partial \mathrm { u } } { \partial \mathrm { t } } + \mathrm { u } ,$ where $\mathrm { u } ( \mathrm { x } , 0 ) = 6 \mathrm { e } ^ { - 3 \mathrm { x } }$ is (A) $u = 6 e ^ { - 3 x + 1 }$ (B) $u = 6 e ^ { - ( 2 x + 2 t ) }$ (C) $u = 6 e ^ { - ( 3 x + 2 t ) }$ (D) $u = 6 e ^ { - ( 3 x - 2 t ) }$ ans:c 3. Polar form of the Cauchy-Riemann equations is (A) $\frac { \partial \mathrm { u } } { \partial \mathrm { r } } = \mathrm { r } \frac { \partial \mathrm { v } } { \partial \theta }$ and $\frac { \partial \mathrm { v } } { \partial \mathrm { r } } = - \mathrm { r } \frac { \partial \mathrm { u } } { \partial \theta }$ (B) $\frac { \partial \mathrm { u } } { \partial \mathrm { r } } = \frac { 1 } { \mathrm { r } } \frac { \partial \mathrm { v } } { \partial \theta }$ and $\frac { \partial \mathrm { v } } { \partial \mathrm { r } } = - \frac { 1 } { \mathrm { r } } \frac { \partial \mathrm { u } } { \partial \theta }$ (C) $\frac { \partial \mathrm { u } } { \partial \mathrm { r } } = \frac { 1 } { \mathrm { r } } \frac { \partial \mathrm { v } } { \partial \theta }$ and $\frac { \partial \mathrm { v } } { \partial \mathrm { r } } = - \mathrm { r } \frac { \partial \mathrm { u } } { \partial \theta }$ (D) $\frac { \partial \mathrm { u } } { \partial \mathrm { r } } = \mathrm { r } \frac { \partial \mathrm { v } } { \partial \theta }$ and $\frac { \partial \mathrm { v } } { \partial \mathrm { r } } = - \frac { 1 } { \mathrm { r } } \frac { \partial \mathrm { u } } { \partial \theta }$ Ans:B 4. If $\mathrm { f } ( \mathrm { z } )$ has a pole of order n at $z = \mathrm { a } ,$ then Residue of function $\mathrm { f } ( \mathrm { z } )$ at a is (A) Res $\mathrm { f } ( \mathrm { a } ) =$ $\frac { 1 } { ( n ) ! } \left\{ \frac { d ^ { n - 1 } } { d z ^ { n - 1 } } \left( ( z - a ) ^ { n - 1 } f ( z ) \right) \right\} _ { x = a }$ (B) Res $\mathrm { f } ( \mathrm { a } ) =$ $\frac { 1 } { ( n - 1 ) ! } \left\{ \frac { d ^ { n - 1 } } { d z ^ { n - 1 } } \left( ( z - a ) ^ { n - 1 } f ( z ) \right) \right\} _ { z = a }$ $( \mathrm { C } ) \operatorname { Res } \mathrm { f } ( \mathrm { a } ) =$ $\frac { 1 } { ( n ) ! } \left\{ \frac { d ^ { n - 1 } } { d z ^ { n - 1 } } \left( ( z - a ) ^ { n } f ( z ) \right) \right\} _ { x = 0 }$ (D) Res $f ( a ) =$ $\frac { 1 } { ( n - 1 ) ! } \left\{ \frac { d ^ { n - 1 } } { d z ^ { n - 1 } } \left( ( z - a ) ^ { n } f ( z ) \right) \right\} _ { z = a }$ Ans:(D) 5.Consider following diagram: AC is a diameter of the large circle and AB=BC. The ratio of areas of the large circle to the small circle of a square is









(A) $4 : 1$ (B) $1 : 4$ (C) $2 : 1$ (D) $1 : 2$ Ans:(C)





6. Which term refers to a single person having authority to oversee all aspects of a product's production scheduling, inventory, dislocation and sales? (A) Project management (B) Product management (C) Commercial management (D) Venture management Ans: (B) 7. The lowest Eigen value of the $2 \times 2$ matrix $\left[ \begin{array} { c c } { 4 } & { 2 } \\ { 1 } & { 3 } \end{array} \right]$ is (A) 1 (B) 2 (C) 3 (D) 5 Ans:(B) 8. Consider the following statements: 1. Mobile cranes are sophisticated machines which are designed for lifting efficiently 2. Mobile cranes are a versatile and reliable means of lifting on site Which of the above statements is/are correct? (A) 1 only (B) 2 only (C) Both 1 and 2 (D) Neither 1 nor 2 Ans: (B) 9. Which of the following statements are correct for portable step-ladders? 1. Used on working platforms to gain height above the protected edge 2. Used in the fully opened position 3. Should be of a length that ensures a person's feet are not positioned any higher than the second top rung Select the correct answer using the codes given below: (A) 2 and 3 only (B) 1 and 3 only (C) 1 and 2 only (D) 1, 2 and 3 Ans: (D) 10. Consider the following Repeat Unit Structure: What is polymer? (A) Poly(amide-imide) (B) Polyacrylonitrile (C) Polybutadiene (D) Polyethylene Ans:(B)









11. Which of the following measures is/are correct for using Mobile Equipment Working Platform (MEWP)? 1. Tyres are properly inflated and air filled 2. SWL to be marked in platforms as identification for carrying loads (A) 1 only (B) 2 only (C) Both 1 and 2 (D) Neither 1 nor 2 Ans: (C) 12. Ozone layer present in the atmosphere protects life on earth by not permitting harmful radiations present in the sunlight to penetrate through it. Ozone layer is formed by the reaction of (A) Chlorofluorocarbons (CFCs) on oxygen (O2) (B) Chlorine (Cl) on oxygen (O2) (C) Solar Ultraviolet rays on Oxygen (O2) (D) Chlorine nitrate (ClNO3) on oxygen (O2) Ans: (C) 13. The insert command is used in 'Auto CAD to insert (A) Objects in the current life (B) Objects in any life (C) Blocks in any drawing file (D) Blocks and wblocks in the current drawing Ans: (D) 14. A cone resting on its base in horizontal plane (HP) is cut by a plane inclined to the axis and parallel to one of its generators, the sectional view will be (A) Ellipse (B) Parabola (C) Hyperbola (D) Circle Ans: (B) 15. Consider the following components: 1. Knowledge of psychology 2. Knowledge of the theory of variation 3. Knowledge of process 4. Knowledge of the system and the theory of optimization Which of the above components comprise the basis of Deming’s Systems of Profound Knowledge? (A) 1, 2 and 3 only (B) 1, 3 and 4 only (C) 1, 2 and 4 only (D) 2, 3 and 4 only Ans: (A) 16. Consider the following statements: 1. Greenfield Privatization or Incremental Privatization denotes encouragement to private sector in areas hitherto reserved for Public Enterprises 2. Cold Privatization refers to measures taken to distance Public Enterprises from the Government Which of the above statements is/are correct? (A) 1 only (B) 2 only (C) Both 1 and 2 (D) Neither 1 nor 2 Ans: (A) 17. Which of the following steps are involved in the product improvement cycle? 1. Sell it in the market 2. Determine quality of performance 3. Design the product based on customer needs 4. Test it in the laboratory Select the correct answer using the codes given below: (A) 1 and 3 only (B) 2 and 4 only (C) 1, 3 and 4 only (D) 1, 2, 3 and 4 Ans: (D) 18. Who is responsible for establishing, documenting and maintaining procedures for post-production handling functions such as storage, packaging and delivery? (A) Production Manager (B) Marketing Manager (C) Vendor (D) Quality Supervisor Ans: (C) 19. A unit produces packing boxes. Out of hourly production of 4,000 boxes, 20 were found to be non-conforming. If the inspector randomly chooses a box from an hour's production, the probability of it being non-conforming is (A) 0.02 (B) 0.10 (C) 0.005 (D) 0.05 Ans: (C) 20. Which of the following are relevant factors regarding quality in service sector? 1. Timeliness of service 2. Customer participation 3. Company personnel motivation 4. Company culture Select the correct answer using the codes given below: (A) 1, 3 and 4 only (B) 1, 2 and 3 only (C) 1, 2, 3 and 4 (D) 2, 3 and 4 only Ans: (C)





21. Which one of the following is a viable alternative to term-loans and are instruments for raising debt finance by large publicly traded firms? (A) Shares (B) Debentures (C) Asset loans (D) Gold loans Ans: (B) 22. Which one of the following makes the design, assembly and operation of complex systems feasible and practical? (A) System Architecture (B) Modularization (C) Standardization (D) Composition Ans: (B) 23. Which one of the following schedules shows the specific activities necessary to complete an activity or work package? (A) Project schedule (B) Master schedule (C) Task schedule (D) Internal schedule Ans: (A) 24. In stable ceramic crystal structure, a cation is surrounded by three anions in the form of a planar equilateral triangle. The ratio of the cation-anion radius for the crystal is nearly (A) 0.16 (B) 0.24 (C) 0.32 (D) 0.41 Ans: (A) 25. During tensile testing of a material, if cross sectional area of the specimen is doubled, the load required to produce the same elongation shall be (A) Double (B) Half (C) Same (D) Four times Ans: (A) 26. When two or more chemically different monomers are polymerized to form a cross link polymer along with some byproduct such as water, the process is known as (A) Crystallographic Polymerization (B) Addition polymerization (C) Copolymerization (D) Condensation polymerization Ans: (D) 27. The number of atoms per unit length whose centres lie on the direction vector for a specific crystallographic direction is called (A) Linear density (B) Theoretical density (C) Atomic density (D) Avogadro number Ans: (A) 28. Which of the following features of atoms determine the degree to which the solute atoms dissolve in the solvent atoms? 1. Atomic size factor 2. Crystal structure 3. Electronegativity (A) 1 and 2 only (B) 1 and 3 only (C) 2 and 3 only (D) 1, 2 and 3 Ans: (D) 29. A state for ionic compounds wherein there is the exact ratio of cations to anions as predicted by the chemical formula is (A) Electroneutrality (B) Stoichiometry (C) Equiliometry (D) Frankel defect Ans: (B) 30. The capacity of a material to absorb energy when it is deformed elastically and then, upon unloading, to have this energy recovered is called (A) Ductility (B) Tensile strength (C) Elasticity (D) Resilience Ans: (D)





31. In which one of the following phase transformations, there are no compositional alternations? (A) Incongruent transformations (B) Congruent transformations (C) Non-equilibrium transformations (D) Equilibrium transformations Ans: (B) 32. In a simple cubic structure, atomic power factor is nearly (A) 0.9 (B) 0.7 (C) 0.5 (D) 0.3 Ans: (C) 33. Which of the following are the advantages of coding audiovisual objects? 1. It allows interaction with the content 2. It improves reusability and coding the content 3. It allows content-based scalability (A) 1 and 2 only (B) 1 and 3 only (C) 2 and 3 only (D) 1, 2 and 3 Ans: (D) 34. The transmission of real-time streams across networks uses Bandwidth Allocation Mechanism (BAM), which is based on (A) Stream peak rate (B) Bucket rate (C) Token bucket depth (D) Packet size Ans: (D) 35. The quality of service provided in a computer network is (A) Presentation layer issue (B) Session layer issue (C) Network layer issue (D) Data link layer issue Ans: (D) 36. The Pre-echo PE distortions in audio signal represents the (A) Theoretical limit on compressibility of particular signals (B) Imaginary components of a signal (C) Critical band analysis of a signal (D) Histogram of the signals Ans: (A) 37. In a computer network, a point-to-point transmission, with one sender and one receiver is called (A) Unicasting (B) Multicasing (C) Broadcasting (D) Internetworking Ans: (A) 38. The Protocol (http), the DNS name of the host, and the file name is identified through (A) Uniform Resource Locator (B) Web Browser (C) Web Server (D) IP address Ans: (A) 39. The traditional way to handle forms and other interactive Web pages is a system called (A) Graphical User Interface (B) Common Gateway Interface (C) Text Based User Interface (D) Command Line Interface Ans: (A) 40. Pretty Good Privacy (PGP) which encrypts the data by using a block cipher is used in (A) FTP security (B) e-mail security (C) Browser security (D) Bluetooth security Ans: (B)





41. The core elements of high-level programming languages are (A) Keywords, Expression and Punctuation (B) Functions, Keywords and Operators (C) Keywords, Operators and Punctuation (D) Functions, Expressions and Operators Ans: (B) 42. The philosophical study of beliefs and knowledge is better known as (A) Ontology (B) Epistemology (C) Entomology (D) Etymology Ans: (B) 43. One branch of ethical philosophy claims that is possible to know right from wrong or good from bad in a very clear and objective manner, is called (A) Non-Cognitivism (B) Ethical Pluralism (C) Cognitivism (D) Utilitarianism Ans: (B) 44. Consider the following statements regarding ‘Engineering Ethics’ 1. It is the activity of understanding moral values 2. It resolves the moral issues and justifies moral judgments 3. It would refer to the set of specifically moral problems and issues related to Engineering. Which of the above statements are correct? (A) 1, 2 and 3 (B) 1 and 2 only (C) 1 and 3 only (D) 2 and 3 only Ans: (D) 45. A situation where very high prices are charged from customers for a limited period of time is known as (A) Gouging (B) Zipping (B) Bamboozing (D) Hoodwinking Ans: (A) 46. Consider the following steps for an individual regarding preparation for disclosure of unethical behavior: 1. Study and document the facts and formulate a plan for an appeal 2. Take up the matter with higher management 3. Discuss the matter with immediate supervisor 4. If the internal appeal does not resolve the conflict, then he should notify the company that he intends to continue with an external review of the problem. What is the correct sequence of order of the above steps? (A) 2, 3, 1 and 4 (B) 1, 3, 2 and 4 (C) 3, 2, 4 and 1 (D) 1, 2, 3 and 4 Ans: (B) 47. Which of the following are the attributes of a profession? 1. The work requires sophisticated skills, use of judgment and exercise of discretion 2. Membership in the profession does not require extensive formal education as well as practical training 3. There are set standards for admission to the profession and conduct for members 4. Significant public good results from practice of the profession. Select the correct answer using the codes given below: (A) 1, 2 and 3 only (B) 1, 2 and 4 only (C) 1, 3 and 4 only (D) 2, 3 and 4 only Ans: (C) 48. What are the core qualities of a professional practitioner? 1. Integrity both with themselves and with others 2. Independent to be free of secondary interests with other parties 3. Competence 4. Discretion-care with communications Select the correct answer using the codes given below: (A) 1, 2, 3 and 4 (B) 1, 2 and 3 only (C) 1 and 3 only (D) 3 and 4 only Ans: (A) 49. When should whistle blowing be attempted? 1. There must be a clear and great harm that can be avoided 2. The whistleblower must be in a clear position to report on the problem 3. The whistleblower must have a reasonable chance of success in stopping the harmful activity 4. The whistleblower feels that all other lines of action within the context of the organization have been explored and shut off Select the correct answer using the codes given below: (A) 1, 2, 3 and 4 (B) 1, 2 and 4 only (C) 1, 3 and 4 only (D) 2 and 3 only Ans: (B) 50. Which of the following are the salient features of the patent Act 1970? 1. It codifies inventors which are not patentable 2. It provides for endorsement of patent with the words ‘license of right’ 3. It provides for revocations of patents in public interest 4. It has provision for validity period also for the patents Select the correct answer using the codes given below: (A) 1, 2, 3 and 4 (B) 1, 2 and 4 only (C) 1, 3 and 4 only (D) 2 and 3 only Ans: (A)





http://ese-generalstudies.blogspot.com





Directions: Each of the next Ten (10) items consists of two statements, one labelled as the 'Statement (I)' and the other as 'Statement (II)’. You are to examine these two statements carefully and select the answers to these items using the codes given below: Codes: (A) Both, Statement (I) and Statement (II) are individually true and Statement (II) is the correct explanation of Statement (I) (B) Both Statement (I) and Statement (II) are individually true but Statement (II) is not the correct explanation of Statement (I) (C) Statement (I) is true but Statement (II) is false (D) Statement (I) is false but Statement (II) is true





51. Statement. (I): All projects have constraints or limitations that inhibit their ability to reach goals and objectives. Statement (II): Time and money are universal constraints of projects. Ans: (A) 52. Statement (I): Training should be conducted among the line and low management for ensuring the importance of environmental protection plan. Statement (II): Environmental science is a developing subject and the people implementing environment strategies should remain up to date with the environmental control processes. Ans: (A) 53. Statement (I): Metals having same crystal structure will have greater solubility. Statement (II): Differences in crystal structure limits the solid solubility. Ans: (A) 54. Statement (I): The tie line is constructed across the two-phase region at the temperature of the alloy. Statement (II): The overall alloy composition is located on the tie line. Ans: (B) 55. Statement (I): Cross linked polymers may be synthesized in which side-branch chains are connected to the main ones. Statement (II): Linear polymers are those in which the repeat units are joined together end to end in single chains. Ans: (B) 56. Statement (I): Abrasive ceramics are used to wear, grind, or cut away other material, which necessarily is softer. Statement (II): The prime requisite for abrasive ceramic group of materials is hardness or wear resistance and a high degree of toughness is essential to ensure that the abrasive particles do not easily fracture. Ans: (D) 57. Statement (I): The prevention cost increase with the introduction of a quality system and may be a significant proportion of the total quality costs. Statement (II): Costs associated with education and training are not included in prevention costs. Ans: (D) 58. Statement (I): An emulator is not a mixture of hardware and software and it cannot be used to test and debug the hardware and software of an external system. Statement (II): Part of the hardware of an emulator is multiwire cable which connects the host system to the system being developed. Ans: (D) 59. Statement (I): Agency-loyalty is acting to fulfill one’s contractual duties to an employer. Statement (II): Agency-loyalty is entirely a matter of actions, whatever its motives. Ans: (C) 60. Statement (I): An EIA is a study of the probable changes in socio-economic and bio physical characteristics of the environment that may result from a proposed action. Statement (II): The purposes of an EIA is to help design projects, which do not disturb the quality of the environment by examining alternatives. Ans: (B)





61. Which one of the following is not a component of ‘Capital Receipts’? (A) Market borrowing including special bonds (B) External loans raised by the Central government from abroad (C) Receipts from taxes on property and capital transactions (D) Provident Funds (State Provident Funds and Publics Provident Fund) Ans: (C) 62. Which one of the following statement is correct with respect to the ‘societal development’? (A) Behaviour grows into habits, .habits into tradition and 'tradition he comes custom (B) Customs grow into mores and mores grow into custom (C) Behaviours grow into customs and customs grow into traditions (D) Folkways grow into tradition and traditions grow into customs Ans: (A) 63. Which one of the following statements is correct with respect to ‘the convergence theory’ on social change? (A) The societal adaptive culture is changing more slowly (B) As societies become modernized, they begin to resemble one another more closely (C) The developed countries shows more growth in social changes than the less developed countries (D) Strong opposition by old people retards the social change Ans: (B) 64. With respect to the conduct and performance of a company, ‘perfect competition’ refers to (A) Large numbers of small firms producing differentiated products (B) Complete freedom in economic life and absence of rivalry among firms (C) Many companies selling similar products with free entry (D) Sole producer selling a distinct product Ans: (B) 65. The cheapest method of marketing of securities with the only cost incurred being on sending ‘letters of rights’ to existing holders is (A) Public issues through prospectus method (B) Offer for sale method (C) Rights issue (D) Subscription by inside coterie method Ans: (C) 66. ‘Fiscal policy’ means (A) Balancing the revenue between and expenditure (B) Establishing equilibrium between demand and supply of goods and services (C) Use of taxation, public borrowing and public expenditure by Government for purposes of ‘stabilization’ or ‘development’ (D) Deficiency as an instrument of growth Ans: (C) 67. Which of the following come under the offerings of ‘MUDRA’ Bank? 1. Portfolio Credit Guarantee 2. Credit for large industries 3. MUDRA Card 4. Credit Enhancement Select the correct answer using the codes given below: (A) 1, 2 and 3 only (B) 1, 3 and 4 only (C) 1, 2 and 4 only (D) 2, 3 and 4 only Ans: (B) 68. Which of the following is/are the key reasons for encouraging start up Entrepreneurship? 1. Innovations 2. Focusing on service industry 3. Bringing the values of proactively into the society Select the correct answer using the codes given below: (A) 1 only (B) 2 only (C) 1 and 3 only (D) 1, 2 and 3 Ans: (D) 69. Which of the following are the main objectivities of Gold Monetization Scheme launched in the country? 1. To monetize gold holdings in the country 2. To increase export of gold from the country 3. To reduce India’s import bill 4. To meet the targets of reduction in fiscal deficit Select the correct answer using the codes given below: (A) 1 and 4 only (B) 2 and 4 only (C) 2 and 3 only (D) 1 and 3 only Key: (A) 70. A person travelled by car 70 km towards north to A then covered 30 km turning left to B. Again he turned towards left and travelled 110 km to C. Then the cycled at the rate of 10 km/hour towards the starting point. The time taken by him to reach the starting point from C will be (A) 3 hours (B) 5 hours (C) 7 hours (D) 21 hours Ans: (B)





71. A student purchases some books for Rs. 1600. If he had bought 8 more books for the same amount, each book would cost Rs 10 less. The number of books he buys is (A) 30 (B) 32 (C) 34 (D) 36 Ans: (B) 72. A hemisphere depression is cut out from one face of the cubical wooden block such that the radius ‘r’ of the hemisphere is equal to half of the edge of the cube. What will be the surface area of the remaining solid? (A) 2$r ^ { 2 } ( \pi + 24 )$ (B) $r ^ { 2 } ( \pi + 24 )$ (C) 2$r ^ { 2 } ( \pi + 36 )$ (D) $r ^ { 2 } ( \pi + 36 )$ Ans: (B) 73. A rod of length l is to be divided into two parts, such that if 5 times the smaller portion is added to half of the larger portion, it will always be less than l.This can be achieved by taking length of the larger portion more than (A) $\frac { 9 } { 10 } \ell$ (B) $\frac { 7 } { 8 } \ell$ (C) $\frac { 6 } { 7 } \ell$ (D) $\frac { 5 } { 6 } \ell$ Ans: (A) 74. Which of the following conditions hold good for a train which crosses the bridge of length $\ell$ in time $t _ { 1 }$ and crosses another bridge of length $\frac { \ell } { 2 }$ in time $t _ { 2 } ?$ $\begin{array} { l l } { \text { 1. } } & { \mathrm { t } _ { 2 } = \frac { \mathrm { t } _ { 1 } } { 2 } } \\ { \text { 2. } } & { 2 \mathrm { t } _ { 2 } > \mathrm { t } _ { 1 } } \\ { \text { 3. } } & { \mathrm { t } _ { 2 } < \frac { \mathrm { t } _ { 1 } } { 2 } } \end{array}$ 4. Speed of train is $\frac { \ell } { 10 }$ if $t _ { 1 } - t _ { 2 } = 5$ Select the correct answer using the codes given below: (A) 1 and 4 only (B) 2 and 4 only (C) 1 and 3 only (D) 2 and 3 only Ans: (B)





75. A tourist covers half of his journey by train at 60 km/h, half of the remainder by bus at 30 km/h and the rest by cycle at 10 km/h. Average speed of the tourist during the journey is (A) 36 km/h (B) 33 km/h (C) 24 km/h (D) 18 km/h Ans: (C) 76. In a lake, the tip of a bud of lotus is seen 10 cm above the surface of water. Forced by the wind, it gradually moved, and just submerged at a distance of 30cm. The depth of water at the root of the lotus plant will be (A) 40 cm (B) 50 cm (C) 60 cm (D) 70 cm Ans: (A) 77. A man sold a chair and a table together for Rs. 7,600, thereby making a profit of 25% on the chair and 10% on the table. By selling them together for Rs. 7,500 he would make a profit of 10% on the chair and 20% on the table. Then the cost price of chair and table will be (A) Rs. 3000 and Rs. 4000 (B) Rs. 3500 and Rs. 4000 (C) Rs. 3000 and Rs. 3500 (D) Rs. 3500 and Rs.3500 Ans: (C) 78. In two concentric circles, a chord length 80 cm of larger circle becomes a tangent to the smaller circle whose radius is 9 cm. The radius of the larger circle will be (A) 13 cm (B) 41 cm (C) 52 cm (D) 75 cm Ans: (B) 79. Professional who breach the ‘duty of care’ are liable for injuries their negligence causes. This liability is commonly referred to as (A) Professional offense (B) Professional negligence (C) Professional misdeed (D) Professional malpractice Ans: (B) 80. Information used in a business, generally unknown to the public, that the company has taken strong measures to keep confidential is called (A) A patient (B) A copyright (C) A trade secret (D) A trade mark Ans: (C)





81. Which one of the following tests can be resorted to in order to check the structural soundness conformance to the specified standards, when all other tests fail? (A) Destructive (B) Non-destructive (C) Full scale load (D) Masonry Ans: (B) 82. Which of the following are the sources of variation in quality control process in construction? 1. Material 2. Operator 3. Inspection activity Select the correct answer using the codes given below. (A) 1, 2 and 3 (B) 1 and 2 only (C) 1 and 3 only (D) 2 and 3 only Key: (A) 83. What is the break-even sale for the following products?









(A) Rs. 90,000 (B) Rs. 80,000 (C) Rs. 60,000 (D) Rs. 40,000 Ans: (A) 84. Which of the following approaches are correct regarding total quality? 1. Opportunity to improve 2. Adoption requires little change 3. React to competitive threats Select the correct answer using the codes given below. (A) 1 and 2 only (B) 1 and 3 only (C) 2 and 3 only (D) 1, 2 and 3 Ans: (D) 85. Which of the following are constraints to the use of TQM in construction process? 1. A transient labour force 2. The construction process is relatively short in duration 3. Hierarchical and vertical organization structure 4. The construction process has not focused on the detailed needs of the customer Select the correct answer using the codes given below. (A) 1 and 4 only (B) 2 and 3 only (C) 1 and 2 only (D) 3 and 4 only Ans: (A) 86. BOD of a waste water sample is estimated to be 180 mg/1. Assuming 4 mg/1 BOD can be consumed in the BOD bottle, the volume of undiluted sample to be added to a 300 ml bottle is nearly (A) 6.7 ml (B) 5.6 ml (C) 4.4 ml (D) 3.3 ml Ans: (A) 87. Venturi scrubber, a device used to remove particulate matter from the atmosphere, works on the principle of (A) Settling by gravitational force (B) Removal by centrifugal force (C) Removal by electrically charged particles (D) Removal by atomized water vapour Ans: (D) 88. Environmental Impact Assessment (EIA) is aimed to help (A) Estimate future needs of the society (B) Smooth implementation of a project (C) Cope with rapid increase in population (D) Resource conservation Ans: (B) 89. Which one of the following is a terrestrial type of ecosystem? (A) Limnetic (B) Estuary (C) Prairie (D) Reefs Ans: (C) 90. What are the limitations of solar energy? 1. Collecting solar energy over large areas and converting it to other forms that can be conveniently transported, stored and used in existing equipment is not economical 2. Low density of solar energy as compared to coal, oil and gas 3. Its major applications are photo thermal conversion, solar water heating, green housing technology and photo voltaic conversion Select the correct answer using the codes given below: (A) 1, 2 and 3 (B) 1 and 2 only (C) 1 and 3 only (D) 2 and 3 only Ans: (B) 91. Acid rain results when gaseous emissions of sulfur oxides $\left( \mathrm { SO } _ { x } \right)$ and nitrogen oxides $\left( \mathrm { NO } _ { x } \right)$ interact with water vapour and (A) Moonlight, and are chemically converted to strong acidic compounds such as sulfuric acid $\left( \mathrm { H } _ { 2 } \mathrm { SO } _ { 4 } \right)$ and nitric acid $\left( \mathrm { HNO } _ { 3 } \right)$ (B) Sunlight, and are chemically converted to strong acidic compounds such as sulfuric acid $\left( \mathrm { H } _ { 2 } \mathrm { SO } _ { 4 } \right)$ and nitric acid $\left( \mathrm { HNO } _ { 3 } \right)$ (C) Moonlight, and are chemically converted to weak acidic compounds such as sulfuric acid $\left( \mathrm { H } _ { 2 } \mathrm { SO } _ { 4 } \right)$ and nitric acid (HNO $_ { 3 } )$ (D) Sunlight, and are chemically converted to weak acidic compounds such as sulfuric acid $\left( \mathrm { H } _ { 2 } \mathrm { SO } _ { 4 } \right)$ and nitric acid $\left( \mathrm { HNO } _ { 3 } \right)$ Ans: $\quad$ (B)





92. The ‘Minamata Tragedy’ was caused by the eating of fish growing in the Minamata Bay contaminated with (A) Peroxy alylnitrate (B) Methyl isocyanate (C) Potassium cyanide (D) Methylmercury Ans: (D) 93. What are the advantages of Biomass as a source of energy? 1. Its storage and transportation is possible 2. It is ecologically safe and is inoffensive 3. Can be developed with present man and material abilities 4. Low capital input required Select the correct answer using the codes given below: (A) 1, 2, 3 and 4 (B) 1, 2 and 3 only (C) 1, 3 and 4 only (D) 2, 3 and 4 only Ans: (A) 94. Consider the following data for a domestic biogas plant: Number of cows $= 5$ Retention time $= 20$ days Temperature $= 30 ^ { \circ } \mathrm { C }$ Dry matter consumed $= 2 \mathrm { kg } / \mathrm { day }$ Bry matter consumer $= 28 \mathrm { MJ } / \mathrm { m } ^ { 3 }$ Density of dry material in fluid $= 50 \mathrm { kg } / \mathrm { m } ^ { 3 }$ The power available from the digester will be nearly (A) 16.2$\mathrm { MJ } / \mathrm { day }$ (B) 24.3$\mathrm { MJ } / \mathrm { day }$ (C) 32.3$\mathrm { MJ } / \mathrm { day }$ (D) 48.6$\mathrm { MJ } / \mathrm { day }$ Ans:(C) 95. The best tool to ensure that there is neither piling up of stocks nor shortage of materials in a project to run it economically is (A) Economic order quantity (B) ABC Analysis (C) Inventory Control and Management (D) Gantt Chart Method Ans: (A) 96. A machine is expected to generate cash saving (after-tax) of Rs. 50,000 per annum over a period of 5 years. Salvage value of machine is 40% of the original cost. If accounting rate of return is 20%, cost of two such machines will be (A) Rs. 78,125 (B) Rs.1,56,250 (C) Rs. 3,12,500 (D) Rs. 6,25,000 Ans: (B) 97. It is expected to receive Rs. 5,000 annually for 3 years with each receipt occurring at the end of the year. With a discount rate of 10%, the present value of the annuity will be nearly (A) Rs. 12,435 (B) Rs. 9,945 (C) Rs. 4,975 (D) Rs. 2,487 Ans: (D) 98. In a project life cycle, the maximum percentage of effort is done in (A) Concept phase (B) Definition phase (C) Planning and organizing phase (D) Implementation phase Ans: (D) 99. In progress of a project, the percentage of error will be less in (A) Definitive cost estimate (B) Detailed estimate (C) Preliminary estimate (D) Study estimate Ans: (B) 100. In principle, the network should not be made complex. No control system, for that matter, can operate unless it is kept simple. This principle is called (A) CPM (B) PERT (C) KISS (D) GERT Ans: (C)





IES GShttp://esegeneralstudies.epizy.com/


 


                             http://coursewhizz.com/


Tuesday, February 19, 2019

UPSC ESE(IES) 2018 GENERAL STUDIES(GS) QUESTION PAPER


PRELIMS EXAMINATION  Questions with Detailed Solutions     PAPER - I GENERAL STUDIES AND ENGINEERING APTITUDE SET-A 01. Government of India had introduced the Consumer Protection Bill, 2015, in the Lok Sabha. The Bill gives the right to consumers to 1. Seek redressal against unfair or restrictive trade practices. 2. File a complaint for overcharging or deceptive charging. Which of the above is/are included in the Bill? (a) 1 only (b) 2 only (c) Both 1 and 2 (d) Neither 1 nor 2 01. Ans: (c) 02. Technology Promotion, Development and Utilization Programme implemented by Department of Scientific and Industrial Research has which of the following components? 1. Industrial R & D Promotion Programme 2. Flagship Programme 3. Information Technology and e-Governance (a) 1 and 2 only (b) 1 and 3 only (c) 2 and 3 only (d) 1, 2 and 3 02. Ans: (b) 03. The Olympic Flame symbolizes (a) Unity among various nations of the world (b) Speed, perfection and strength (c) The development of sportsmanship (d) Continuity between ancient and modern games 03. Ans: (d) 04. Consider the following statements: 1. IPDS strengthens the distribution network in urban areas while DDUGJY does the same in rural areas. 2. DELP focuses to substitute LED bulbs for incandescent bulbs. Which of the above statements is/are correct? (a) 1 only (b) 2 only (c) Both 1 and 2 (d) Neither 1 nor 2 04. Ans: (c) Integrated Power Development Scheme(IPDS)  DDUGJY(Deen Dayal Upadhyaya Gram Jyoti Yojana) Domestic Efficiency Lighting Programme (DELP) 05. Consider the following statements: Non-performing assets (NPAs) decline in value when 1. Demand revives in the economy. 2. Capacity utilization increases. 3. Capacity utilization, though substantive, is yet sub-optimal. 4. Capacity utilization decrease consequent upon merger of units. Which of the above statements are correct? (a) 1, 3 and 4 only (b) 1, 2 and 4 only (c) 1, 2 and 3 only (d) 1, 2, 3 and 4 05. Ans: (c) 06. The meaning of ‘Carbon Footprint’ is described by the amount of (a) Carbon dioxide released into the atmosphere as a result of the activities of a particular individual, organization or community (b) Greenhouse gases emitted by industries contributing to global warming (c) Carbon emissions released by the burning of jet fuel (d) Increase in the carbon content of the atmosphere due to the felling of trees 06. Ans: (a) 07. What is Crowdfunding? (a) Money collected for public welfare projects by levying an entry fee to exhibitions, shows, etc. (b) Money collected by charitable organizations by placing a donation box at prominent locations (c) Money raised by innovators and inventors by launching their products and services through the Internet (d) Money raised by individuals by passing the hat around to onlookers at a street performance 07. Ans: (c) 08. The sum of squares of successive integers 8 to 16, both inclusive, will be (a) 1126 (b) 1174 (c) 1292 (d) 1356 08. Ans: (d) 09. Consider a trapezoidal lamina ABCD, with AB parallel to DC, 6 cm apart; AB is 8 cm; CD is 12 cm; CD extends outwards by 1 cm from the foot of the perpendicular from B on DC. The centre of gravity of the lamina will be (a) Along AC at a height of 3 cm from DC (b) Along BD at a height of 3 cm from DC (c) Along the line joining the mid-point of AB to the mid-point of DC; at a height of 2.8 cm from DC (d) At the intersection point of AC and DB 09. Ans: (c) 10. A cantilever bema ABC is shown to a highly exaggerated vertical scale. Horizontally, AB is 2 m long and BC is 0.6 m long. Loads act only in the region AB, and there are no loads in the region BC. Under this load system, the deflection at B is 0.24 cm and the slope of the beam at B is theta, where sin  theta= 0.038. What is the deflection at D, which is midway between B and C? (a) 0.2406 cm (b) 0.2514 cm (c) 0.2530 cm (d) 0.2452 cm 10. Ans: (*) 11.Given that 0.8 is one root of the equation $x ^ { 3 } - 0.6 x ^ { 2 } - 1.84 x + 1.344 = 0$ The other roots of this equation will be (a) 1.1 and – 1.4 (b) –1.2 and 1.4 (c) 1.2 and –1.4 (d) –1.1 and 1.4 Ans: (c) 12. The equation, $x ^ { 3 } - 8 x ^ { 2 } + 37 x - 50 = 0$ is factored and it has $( 3 + 4 i )$ as one of its roots. What is the real root of this equation? $\begin{array} { l l l } { \text { (a) } 2 } & { \text { (b) } 4 } & { \text { (c) } 6.5 } \end{array}$ (d) 13 12.ans:(a) 13. Circle A is 4$\mathrm { cm }$ in diameter, circle $\mathrm { B }$ is 5$\mathrm { cm }$ in diameter. Circle C has its circumference equal to the sum of the circumferences of both $\mathrm { A }$ and $\mathrm { B }$ together. What will be the ratio of the area of circle C, with respect to the area of circle A and circle B respectively? (a) 5.0625 and 1.84 (b) 3.875 and 1.84 (c) 5.0625 and 3.24 (d) 3.875 and 3.24 13. Ans: (c) 14. The 12 digits on the face of a clock are to be represented employing contributions of only the number 9 as either 9 or $\sqrt { 9 }$.The other prescribed conditions are (i) the least number of uses alone are permitted; and (ii) when alternates are possible, use of 9 will be preferred over use of $\sqrt { 9 }$ which should be used minimally. How many times would $\sqrt { 9 }$ have to be used? (a) 6 (b) 5 (c) 4 (d) 3 14. Ans: (b) esegeneralstudies.epizy.com/ 15.In a particular test, the marks scored by 4 candidates – A, B, C and D are as follows: Marks obtained by A and B add to 100; Marks obtained by C and D add up to those scored by A; B scores 4 times of D; D scores 10 marks less than C; The marks obtained by C will be (a) 30 (b) 15 (c) 20 (d) 25 15.Ans: (d) 16.In a project there are 9 activities: A, B, C, D which are sequential; E, F, G which are sequential: H, K which are sequential. Also E, F, G run parallel to B, C, D; and H, K run parallel to A, B, C, D. Besides these activity dependencies, it is also needful that B be completed before taking up G; A and H be completed before taking up D and K. How many dummies are to be drawn on the activity network? (a) 5 (b) 4 (c) 3 (d) 2 Ans: (c) 17. What is the form of the function f(x) for the following data? $\begin{array} { | c | c | c | c | c | } \hline X & { 0 } & { 1 } & { 2 } & { 3 } \\ \hline f ( x ) & { 3 } & { 6 } & { 11 } & { 18 } \\ \hline \end{array}$ $( a ) x ^ { 2 } + 2 x + 3 \quad$ (b) $x ^ { 2 } - 2 x + 3$ (c) $x ^ { 2 } + 2 x - 3 \quad$ (d) $x ^ { 2 } - 2 x - 3$ 17. Ans: (a) 18. Let the Eigenvector of the matrix $\left[ \begin{array} { c c } { 1 } & { 2 } \\ { 0 } & { 2 } \end{array} \right]$ be written in the form $\left[ \begin{array} { c } { 1 } \\ { a } \end{array} \right]$ and $\left[ \begin{array} { c } { 1 } \\ { b } \end{array} \right]$ . What is the value of (a + b)? (a) 0$\quad$ (b) $\frac { 1 } { 2 }$ (c) 1 (d) 2 18. Ans: (b) 19. What is the cube root of 1468 to 3 decimal places? (a) 11.340 (b) 11.353 (c) 11.365 (d) 11.382 19. Ans: (c) 20. Let $\mathrm { f } ( \mathrm { x } ) = \left\{ \begin{array} { c } { - \pi , \text { if } - \pi < \mathrm { x } \leq 0 } \\ { \pi , \text { if } 0 < \mathrm { x } \leq \pi } \end{array} \right.$ be a periodic function of period 2$\pi .$ The coefficient of $\sin 5 \mathrm { x }$ in the Fourier series expansion of $\mathrm { f } ( \mathrm { x } )$ in the interval $[ - \pi , \pi ]$ is $\begin{array} { l l } { \text { (a) } \frac { 4 } { 5 } } & { \text { (b) } \frac { 5 } { 4 } } \end{array}$ $\begin{array} { l l } { \text { (c) } \frac { 4 } { 3 } } & { \text { (d) } \frac { 3 } { 4 } } \end{array}$ 20. Ans: (a)





21. What is the value of $( 1525 ) ^ { 0.2 }$ to 2 decimals places? (a) 4.33 (b) 4.36 (c) 4.38 (d) 4.30 21. Ans: (c)





22.In the Laurent expansion of $\mathrm { f } ( \mathrm { z } ) = \frac { 1 } { ( \mathrm { z } - 1 ) ( \mathrm { z } - 2 ) }$ valid in the region $1 < | \mathrm { z } | < 2 ,$ the coefficient of $\frac { 1 } { \mathrm { z } ^ { 2 } } \mathrm { is }$ (a) 0 (b)$\frac { 1 } { 2 }$ (c) 1 (d) –1 22. Ans: (d)





23.If $u = \log \left( \frac { x ^ { 2 } + y ^ { 2 } } { x + y } \right) ,$ what is the value of $x \frac { \partial u } { \partial x } + y \frac { \partial u } { \partial y } ?$ (a) 0 (b) 1 (c) u (d) eu 23. Ans: (b)





24.What is the residue of the function $\frac { 1 - e ^ { 2 z } } { z ^ { 4 } }$ at its pole? $\begin{array} { l l } { \text { (a) } \frac { 4 } { 3 } } & { \text { (b) } - \frac { 4 } { 3 } } \end{array}$ $( \mathrm { c } ) - \frac { 2 } { 3 } \quad \quad$ (d) $\frac { 2 } { 3 }$ 24. Ans: (b)





25. What is the maximum value of $z ,$ if $z = 10 x + 6$ y subject to the constraints $3 x + y \leq 12,2 x + 5 y \leq 34 , x \geq 0 , y \geq 0 ?$ (a) 56 (b) 52 (c) 50 (d) 40 25. Ans: (a) 26. Which of the following concepts are relatable to income of members of the public while considering public welfare? 1. Sensitivity of demand 2. Elasticity of demand 3. Sensitivity of expenditure 4. Elasticity of expenditure (a) 1 and 2 only (b) 2 and 3 only (c) 3 and 4 only (d) 1 and 4 only 26. Ans: (c) 27. Consider the following provisions regarding safety on highways, where major improvement works may also be in progress: 1. Highly visible barricades to avoid falling of vehicles in deep interspaces ahead (including drainages) 2. Wire-net provisions to ward off road slippages 3. Signages for wild-animals crossing (like deer, elephant, etc.) 4. Signages on minor gradients Which of the above are relevant? (a) 1, 2, 3 and 4 (b) 1, 2 and 4 only (c) 1, 3 and 4 only (d) 1, 2 and 3 only 27. Ans: (d)





28. A vehicle moving at a speed of 88 km/hr weighs 62293.5 N and its rolling resistance coefficient is 0.018. The rolling resistance of the vehicle is (a) 1121.3 N (b) 1000.4 N (c) 975.7 N (d) 845.6 N 28. Ans: (a) Rolling Resistance=0.018 x 62293.5 29. For a vehicle travelling at 24 km/hr having a wheel radius of 0.305 m with overall gear ratio G = 19.915, and when torque transmitted is 203.6 N.m, the engine speed and power are, nearly (a) 4155 rpm and 88.6 kW (b) 4500 rpm and 88.6 kW (c) 4155 rpm and 95.4 kW (d) 4500 rpm and 95.4 kW 29. Ans: (a)





30. A rod of length L, cross-section area A1 and modulus of elasticity E1, has been placed inside a tube of length L, of cross-section area A2 and modulus of elasticity E2, and the two are firmly held by end plates. The portion of the load P applied on the end plates shared by rod and tube, respectively,are (a) $\frac { \mathrm { PA } _ { 1 } \mathrm { E } _ { 1 } } { \mathrm { A } _ { 1 } \mathrm { E } _ { 1 } + \mathrm { A } _ { 2 } \mathrm { E } _ { 2 } }$ and $\frac { \mathrm { PA } _ { 2 } \mathrm { E } _ { 2 } } { \mathrm { A } _ { 1 } \mathrm { E } _ { 1 } + \mathrm { A } _ { 2 } \mathrm { E } _ { 2 } } \quad$ (b) $\frac { \mathrm { PA } _ { 2 } \mathrm { E } _ { 2 } } { \mathrm { A } _ { 1 } \mathrm { E } _ { 1 } + \mathrm { A } _ { 2 } \mathrm { E } _ { 2 } }$ and $\frac { \mathrm { PA } _ { 1 } \mathrm { E } _ { 1 } } { \mathrm { A } _ { 1 } \mathrm { E } _ { 1 } + \mathrm { A } _ { 2 } \mathrm { E } _ { 2 } }$ (c) $\frac { \mathrm { PA } _ { 1 } \mathrm { E } _ { 1 } } { \mathrm { A } _ { 1 } \mathrm { E } _ { 1 } + \mathrm { A } _ { 2 } \mathrm { E } _ { 1 } }$ and $\frac { \mathrm { P } \mathrm { A } _ { 2 } \mathrm { E } _ { 2 } } { \mathrm { A } _ { 1 } \mathrm { E } _ { 2 } + \mathrm { A } _ { 2 } \mathrm { E } _ { 2 } } \quad$ (d) $\frac { \mathrm { PA } _ { 1 } \mathrm { E } _ { 1 } } { \mathrm { A } _ { 1 } + \mathrm { A } _ { 2 } }$ and $\frac { \mathrm { P } \mathrm { A } _ { 2 } \mathrm { E } _ { 2 } } { \mathrm { A } _ { 1 } + \mathrm { A } _ { 2 } }$ 30. Ans: (a)





31. A weight of 240 N is dropped on to a close-coiled helical spring made up of 18 mm spring steel wire. The spring consists of 22 coils wound to a diameter of 180 mm. If the instantaneous compression is 120 mm; what is the height of drop of the weight, given G = 88 x 103 N/mm2? (a) 450 mm (b) 300 mm (c) 250 mm (d) 150 mm 31. Ans: (d) 32. Consider the following statements regarding Ergonomic Design: 1. Reducing the stress on the spinal cord and providing for lesser fatigue-causing sitting arrangements. 2. Arrangements of keys on the computer keyboard towards optimizing finger stress level. 3. Catering to increasing demand to produce more pleasing objects. Which of the above statements are correct? (a) 1 and 2 only (b) 2 and 3 only (c) 1 and 3 only (d) 1, 2 and 3 32. Ans: (a) 33. Which type of output device creates coloured images which look and feel like photographs? (a) Electrostatic plotter (b) Laser printer (c) Dye sublimation printer (d) Inkjet plotter 33. Ans: (c) 34. Consider the following statements with reference to Six-Sigma: 1. It is a set of techniques and tools for process improvement. 2. It postulates that any process must not produce more than 3.4 defects per one million opportunities. 3. It is an initiative of Motorola. Which of the above statements are correct? (a) 1 and 2 only (b) 1 and 3 only (c) 2 and 3 only (d) 1, 2 and 3 34. Ans: (d) 35. Consider the following statements regarding a Grillage Foundation: 1. It is provided for heavily loaded isolated columns. 2. It is treated as a spread foundation. 3. It consists of two sets of perpendicularly placed steel columns. Which of the above statements are correct? (a) 1 and 2 only (b) 1 and 3 only (c) 2 and 3 only (d) 1, 2 and 3 35. Ans: (d) 36. Consider the following statements regarding Insolation: 1. It is the solar radiation that reaches the Earth’s surface. 2. It is measured by the amount of solar energy received per square centimetre per minute. 3. It is the amount of solar energy absorbed by the stratosphere. Which of the above statements are correct? (a) 1, 2 and 3 (b) 1 and 2 only (c) 1 and 3 only (d) 2 and 3 only 36. Ans: (b) 37. Consider the following statements regarding Quality Circle: 1. It is a small group of people working in different areas of an organization with multiple expertises. 2. It consists of people who volunteer themselves. 3. It is a human resource development technique. 4. It is a problem-solving forum. Which of the above statements are correct? (a) 2, 3 and 4 only (b) 1, 2 and 3 only (c) 1, 3 and 4 only (d) 1, 2 and 4 only 37. Ans: (a) 38. Consider the following statements: 1. In work breakdown structure, top-down approach is adopted. 2. Duration along critical path is the shortest duration permissible. 3. PERT is probabilistic in its approach. Which of the above statements are correct? (a) 1 and 2 only (b) 1 and 3 only (c) 2 and 3 only (d) 1, 2 and 3 38. Ans: (d) 39. Let the sum of the squares of successive integers $0,1,2 , \ldots \ldots \ldots \ldots - 1 ,$ n be donated by S. Let the sum of the cubes of the same integers be denoted by C. It is desirable that $\frac { C } { \mathrm { S } } ,$ as n increases in steps of ‘unity’ from ‘zero’, is given by the series: $\frac { 0 } { 1 } , \frac { 3 } { 3 } , \frac { 9 } { 5 } , \frac { 18 } { 7 } , \frac { 30 } { 9 } , \ldots \ldots \ldots \ldots$ (for $\mathrm { n } = 0,1,2,3,4 \ldots \ldots . )$ What will this ratio be for n = 8? $\begin{array} { l l l l } { \text { (a) } \frac { 108 } { 17 } } & { \text { (b) } \frac { 103 } { 17 } } & { \text { (c) } \frac { 103 } { 15 } } & { \text { (d) } \frac { 100 } { 15 } } \end{array}$ 39. Ans: (a)





41. Consider the following statements with regard to atmospheric humidity: 1. Absolute humidity is the amount of water vapour per unit volume. 2. Hygrometer is used to measure relative humidity. 3. Dew point is the temperature at which the relative humidity is 75%. Which of the above statements are correct ? (a) 1 and 2 only (b) 1 and 3 only (c) 2 and 3 only (d) 1, 2 and 3 41. Ans: (a) at dew poin relative humidity is 100%. 42. Sanitary/municipal fills and waste heaps are unavoidably hazardous due to 1. Leachates 2. Emanating gases 3. Rodents and wandering animals 4. Automobile workshops that seem to have an affinity for such neighbourhoods Which of the above are correct ? (a) 1 and 4 only (b) 1 and 2 only (c) 2 and 3 only (d) 3 and 4 only 42. Ans: (b) 43. Consider the following statements regarding depletion of the ozone layer: 1. Excessive release of chlorine and bromine in the environment from man-made compounds, such as chlorofluorocarbons. 2. Occurrence of certain natural phenomena such as sunspots, and stratospheric winds. 3. Degradation of materials by ultra-violet radiation. 4. Major volcanic eruptions. Which of the above can be categorized as causing ozone depletion ? (a) 1, 2 and 3 only (b) 1, 3 and 4 only (c) 1, 2 and 4 only (d) 2, 3 and 4 only 43. Ans: (c) 44. Which one of the following is the major characteristic of deciduous trees ? (a) They do not lose their leaves. (b) They shed their leaves annually. (c) They synthesize their own food. (d) They depend on other factors for their food. 44. Ans: (b) 45. A wall, rectangular in shape, has a perimeter of 72 m. If the length of its diagonal is 18 m, what is the area of the wall? (a) 224 m2 (b) 486 m2 (c) 572 m2 (d) 606 m2 45. Ans: (b) 46. To isolate an enclosed area for conservation, an open traverse is run keeping close to (but outside of) the exterior boundary of the area through ground points A - B - C- D - E - F - G - towards H (to be eventually located.) AB is 80 degree to the East of the North line at A. Deflection/Interior angles at B, C, D, E, F are indicated. What would be magnitude of the deflection angle at G (as marked) so that GH may run parallel to BA ? (Lengths are immaterial in this case). (a) $190 ^ { \circ }$ (b) $210 ^ { \circ }$ (c) $200 ^ { \circ }$ (d) $230 ^ { \circ }$ 47. Consider the following characteristics with respect to Alpha particles: 1. They have large specific ionization values. 2. They dissipate their energy rather slowly. 3. They can penetrate the outer layer of human skin. 4. Their emitters are heavy elements. Which of the above statements are correct ? (a) 1 and 4 only (b) 1 and 3 only (c) 2 and 4 only (d) 2 and 3 only 47. Ans: (a) 48. Increased biological oxygen demand is an indication of 1. Low microbial contamination. 2. Absence of microbial pollution. 3. High level of microbial contamination. Which of the above statements is/are correct ? (a) 1 only (b) 2 only (c) 3 only (d) 1, 2 and 3 48. Ans: (c) 49. An association of two organisms of different species for mutual benefit, and where the individuals may not be able to survive separately, is called (a) Commensalism (b) Parasitic (c) Non-symbiotic (d) Symbiotic 49. Ans: (d) 50. A simple project comprises of two start-to-end parallel paths, each with three activities in series, with no interpath dependencies. The a, m, b data (in days) for each activity are shown in the diagram. Assuming that three activities in series are enough for further computations, what will be the total project duration and its standard deviation? (a) 35$\frac { 1 } { 2 }$ days and $\frac { 14 } { 3 }$ days (b) 34$\frac { 1 } { 2 }$ days and $\frac { 5 } { 2 }$ days (c) 35$\frac { 1 } { 2 }$ days and $\frac { 13 } { 6 }$ days (d) 34$\frac { 1 } { 2 }$ days and $\frac { 11 } { 6 }$ days 50. Ans: (d) 51. Crashing is (a) Abandoning the project (b) Completing the project with all possible haste (c) Reduction of duration for a few of the activities (d) Reducing the cost of the project with all needful modifications 51. Ans: (c) 52. ABC analysis in materials management is a method of classifying the inventories based on the (a) economic order quantity (b) value of annual usage of the items (c) volume of material consumption (d) quantity of material used 52. Ans: (b) 53. CPM method of network analysis is 1. Ideally suited for linearly extending works 2. Meant essentially for research and development activities 3. Activity-oriented 4. Used of planning, scheduling and controlling purposes Which of the above statements are correct (a) 1 and 2 only (b) 2 and 3 only (c) 3 and 4 only (d) 1 and 4 only 53. Ans: (c) 54 The objective function $z = 3 \mathrm { x } _ { 1 } + 5 \mathrm { x } _ { 2 }$ is to be maximized subject to constraints $\mathrm { x } _ { 1 } + 2 \mathrm { x } _ { 2 } \leq 200$ $\mathrm { x } _ { 1 } + \mathrm { x } _ { 2 } \leq 150$ $\mathrm { x } _ { 1 } , \mathrm { x } _ { 2 } \geq 0$ The values of $\mathrm { x } _ { 1 }$ and $\mathrm { x } _ { 2 }$ in this context are respectively (a) 100 and 75 (b) 125 and 75 (c) 100 and 50 (d) 125 and 50 54. Ans: (c) 55. Consider the length of a room is 15m and width is 10m. If the sum of the areas of the floor and ceiling is equal to the sum of the areas of the four walls, then the volume of the room is $\begin{array} { l l } { \text { (a) } 900 \mathrm { m } ^ { 3 } } & { \text { (b) } 1000 \mathrm { m } ^ { 3 } } \\ { \text { (c) } 1200 \mathrm { m } ^ { 3 } } & { \text { (d) } 1500 \mathrm { m } ^ { 3 } } \end{array}$ 55. Ans: (a) 56. If the EOQ is 360 units, order cost is Rs. 5 per order and carrying cost is Rs.0.20 per unit, what is the usage ? (a) 2654 units (b) 2592 units (c) 1872 units (d) 1574 units 56. Ans: (b) 57. If $\mathrm { L } _ { \mathrm { j } } =$ the latest occurrence time for $j$ $\mathrm { E } _ { \mathrm { i } } =$ the earliest occurrence time for event i, $\mathrm { T } _ { \mathrm { ij } } =$ the duration of activity ij what is the total float for activity ij ? $\begin{array} { l l } { \text { (a) } \mathrm { E } _ { \mathrm { i } - } \mathrm { L } _ { \mathrm { j } } - \mathrm { T } _ { \mathrm { ij } } } & { \text { (b) } \mathrm { L } _ { \mathrm { j } } - \mathrm { E } _ { \mathrm { i } } - \mathrm { T } _ { \mathrm { ij } } } \\ { \text { (c) } \mathrm { T } _ { \mathrm { ij } } - \mathrm { E } _ { \mathrm { i } } - \mathrm { L } _ { \mathrm { j } } } & { \text { (d) } \mathrm { T } _ { \mathrm { ij } } - \mathrm { L } _ { j } + \mathrm { E } _ { \mathrm { i } } } \end{array}$ 57. Ans: (b) 58. The process of removing irregular portions of stones and facilitating their easy transportation is known as (a) Quarrying (b) Reticulating (c) Dressing (d) pointing 58. Ans: (c) 59. On which of the following factors does hysteresis loss depend? 1. Magnetic field intensity 2. Frequency of the field 3. volume of material 4. Neel temperature (a) 1,2 and 4 only (b) 1,3 and 4 only (c) 2,3 and 4 only (d) 1,2 and 3 only 59. Ans: (d) 60. What is the volume of an FCC unit cell in terms of its atomic radius R? $\left($ a) $\sqrt { 3 } \mathrm { R } ^ { 3 } \quad$ (b) 16$\mathrm { R } ^ { 3 } \sqrt { 2 } \quad$ (c) 16$\mathrm { R } ^ { 3 } \sqrt { 3 } \quad$ (d) $\sqrt { 2 } \mathrm { R } ^ { 3 }\right.$ 60. Ans: (b) 61. How much sulphur is required per 100kg of final rubber product to completely crosslink butadiene rubber? (a) 17 kg (b) 27 kg (c) 37 kg (d) 47 kg 61. Ans: (c) 62. Which one of the following is termed as sacrificial protection of metal? (a) Galvanization (b) Tinning (c) organic coating (d) Inorganic coating 62. Ans: (a) 63. The material used in the production of bearings is (a) Cast iron (b) Babitt metal (c) Pig iron (d) Steel 63. Ans: (b) 64. Malleable cast iron is produced 1. By quick cooling of cast iron. 2. By adding magnesium to molten cast iron. 3. From white cast iron by annealing. Which of the above statements is/are correct? (a) 1 only (b) 2 only (c) 3 only (d) 1, 2 and 3 64. Ans: (d) 65. The critical temperature above which ferromagnetic materials lose their magnetic property is called (a) Kelvin point (b) Curie point (c) Recrystallization point (d) Celsius point 65. Ans: (b) 66. The Hall Effect may be used to 1. Determine whether the semiconductor is p-type or n-type. 2. Determine the carrier concentration. 3. Calculate the mobility. Which of the above statements are correct? (a) 1 and 2 only (b) 1 and 3 only (c) 2 and 3 only (d) 1, 2 and 3 66. Ans: (d) 67. Which of the following sets of free software tools are suitable for ICT-based education as well as an open source? (a) Scilab, Osdag, PHP and Latex (b) Java, LibreOffice, Audacity and Matlab (c) Scilab, Arduino, LibreOffice and Latex (d) Scilab, Octave, Netduino and Latex 67. Ans: (c) 68. Which of the following are the benefits of e-governance system? 1. Simplicity, efficiency and accountability 2. Quality service to citizens 3. Better access to information 4. Expanded reach of governance (a) 1, 2 and 3 only (b) 1, 2 and 4 only (c) 3 and 4 only (d) 1, 2, 3 and 4 68. Ans: (d) 69. What does CDMA stand for? (a) Code Division Mobile Access (b) Code Division Multiple Access (c) Code Division Multiple Applications (d) Code Division Mobile Applications 69. Ans: (b) 70. A small production unit now works 6 days per week with 3.5 hours of first shift every one of the 6 days and 3 hours of second shift for each of the first 5 days. Wage negotiations led to an agreement to work on 5 days a week with both shifts together clocking 7.5 hours per day with an 8% increase in weekly wages. How much change in the hourly production would mean parity in the agreement for both management and employees? (a) 3.68% (b) 2.15% (c) 1.82% (d) 1.33% 70. Ans: (a) 71. Consider the following statements: 1. National Agricultural Portal, eNAM, is designed to create a unified national market for agricultural commodities 2. Farmers can showcase their produce online from the nearest market and the buyer can quote his price form anywhere. Which of the above statements is/are correct? (a) 1 only (b) 2 only (c) Both 1 and 2 (d) Neither 1 nor 2 71. Ans: (c) 72. Consider the following statements regarding the code of ethics for Engineers: 1. The safety, health and welfare of the public are of paramount importance. 2. Perform services only in the area of their competence. 3. Issue public statements strictly in an objective and truthful manner. 4. Avoid deceptive acts. Which of the above statements are correct? (a) 1, 2 and 3 only (b) 1, 2 and 4 only (c) 3 and 4 only (d) 1, 2, 3 and 4 72. Ans: (d) 73. In a radar system, the term ‘Rat-Race’ is used in connection with (a) Modulator (b) Pulse characteristics (c) Receiver Bandwidth (d) Duplexer 73. Ans: (d) 74. Consider the following statements: 1. Material science deals with the strength and stiffness behaviour of components (buildings/ machines/vehicle facilities) based on their response to imposed stressed (forces, moments, torque, etc.). 2. Material properties are dependent on their micro-structure and response to force fields and surface interaction. Which of the above statements is/are correct? (a) 1 only (b) 2 only (c) Both 1 and 2 (d) Neither 1 nor 2 74. Ans: (b) 75. PQLI is based on (a) Infant mortality, life expectancy and adult literacy rate (b) Crime rate, clean environment and quality of housing (c) Air pollution, water pollution and sanitation conditions (d) Health, education and environment 75. Ans: (a) Physical Quality of Life Index 76. HDI is better index of development because (a) GDP growth may not consider personal growth situations (b) It takes into consideration reduction of poverty (c) It covers income, health and education aspects of development (d) It covers promotion of growth 76. Ans: (c) Human Development Index 77. IPR protects the use of information and ideas that are of (a) Ethical value (b) Moral value (c) Social value (d) Commercial value 77. Ans: (d) 78. A whistleblower is someone who (a) Whistles classical music (b) Informs on any illegal, unethical or corrupt activity going on in the organisation (c) Is adept in whistling (d) Boasts about himself/ herself 78. Ans: (b) 79. What is meant by ‘conflict of interest’? (a) Being interested in many subjects (b) Hobbies interfering in education (c) Least interest in the job taken up or assigned (d) A conflict between the private interests and the official responsibilities of a person in a position of trust 79. Ans: (d) 80. What is ‘Nepotism’? (a) Undermining the morale of workers (b) Harassment of women workers (c) Being autocratic in decision-making (d) Hiring friends or relatives and showing favouritism in work 80. Ans: (d) Directions: Each of the next Twenty (20) items consists of two statements, one labelled as ‘Statement (I)’ and the other as ‘Statement (II)’. Examine these two statements carefully and select the answers to these items using the codes given below: Codes: (a) Both Statement (I) and Statement (II) are individually true and Statement (II) is the correct explanation of Statement (I) (b) Both Statement (I) and Statement (II) are individually true, but Statement (II) is not the correct explanation of Statement (I) (c) Statement (I) is true, but Statement (II) is false (d) Statement (I) is false, but Statement (II) is true 81. Statement (I): Atoms can neither be created nor destroyed. Statement (II): Under similar conditions of temperature and pressure, equal volumes of gases do not contain an equal number of atoms. 81. Ans: (d) 82. Statement (I): Lifts and external staircases are provided with access form the lobby area of each floor in multi-storey blocks. The external staircase must be accessible through self-closing, 180oswing unlocked doors (with provision for locking at appropriate conditions). Statement (II): Such staircases should not be inadvertently subjected to spreading of smoke, but must yet provide unhindered exit from the lobby of each floor. 82. Ans: (a) 83. Statement (I): Volcanic eruption is often accompanied by earthquakes. Statement (II): Volcanoes erupt dust particles in the atmosphere. 83. Ans: (b) 84. Statement (I): Quality is essential for survival and growth of an organisation in the present era of tough competition. Statement (II): The concept of quality is confined only to construction and manufacturing organisations. 84. Ans: (c) 85. Statement (I): The concept of Just-In-Time is operationalized when the exact number of units required are bought at each successive stage of production, at the appropriate time. Statement (II): Just-In-Time concept has been expanded to mean a manufacturing philosophy of eliminating waste. 85. Ans: (a) 86. Statement (I): Total Productive Maintenance (TPM) is productive maintenance involving total participation as a group activity. Statement (II): Under the aegis of TPM, individual operators generally take care of minor maintenance aspects. 86. Ans: (a) 87. Statement (I): Green energy refers to one which does not harm the ecosystem of planet Earth. Statement (II): All renewable energy is green energy. 87. Ans: (b) 88. Statement (I): To practise terraced cultivation in hill slopes, it can be admissible to have the vertical face of the terraced boundary run perpendicular to the ground trace of the fault line, if any, in the underlying land. Statement (II): Fault lines are susceptible to slips and should be guarded against in land use. 88. Ans: (a) 89. Statement (I): Normally carbon dioxide is not considered an air pollutant. Statement (II): Carbon dioxide is a constituent of atmospheric air. 89. Ans: (b) 90. Statement (I): The size of a hydrogen balloon increases as it rises in the air. Statement (II): The material of the balloon can be easily stretched. 90. Ans: (a) 91. Statement (I): Preparation of bar charts is merely a scheduling operation while the preparation and analysis of a network is a planning function. Statement (II): A bar chart, prima facie, does not show the interrelationships between activities. 91. Ans: (d) 92. Statement (I): Project management is essentially the process to plan its implementation and to pre-determine the period-wise need of resources including funds and personnel, given the choice of total duration and quality standards. Statement (II): Of the four dimensions (not denying that there can be some more) of a project, viz., scope, cost, time and quality, only any two can be pre-assigned; others have to abide by these two prescriptions. 92. Ans: (c) 93. Statement (I): High strength, super-duralumin alloys are adopted in the manufacture of aero engines. Statement (II): Precipitation heat treatment is adopted for duralumin products. 93. Ans: (a) 94. Statement (I): Metal carbides and carbon are used as refractories as they resist oxidation. Statement (II): Metal carbides and carbon are not particularly suitable for high temperature applications. 94. Ans: (c) 95. Statement (I): Long chain polymers are weaker than most ceramics and metals. Statement (II): The molecular chains in long chain polymers are bonded to each other with Vander Waals bonds. 95. Ans: (a) 96. Statement (I): Mechanically, pearlite has properties intermediate between the soft ductile ferrite and hard brittle cementite. Statement (II): Alpha iron can be made magnetic above 768C. 96. Ans: (c) above 768 it loses magnetic property 97. Statement (I): Information and communication technologies can play a key role in the development and economic growth of rural India. Statement (II): Successful ICT application in e-governance giving respective one-stop solutions for rural communities is an absolute need of the hour. 97. Ans: (a) 98. Statement (I): Increasingly, employers have generally tended to expect engineers to possess both hard skills and soft skills. Statement (II): Soft skills mean the knowledge of software. 98. Ans: (c) 99. Statement (I): What is legal may not always be ethical. Statement (II): Ethical standards and the law, share the same theme, i.e., what is permissible and impermissible. 99. Ans: (b) 100. Statement (I): A greenhouse gas is any gas in the atmosphere which absorbs and re-emits heat and thereby keeps the planet’s atmosphere warmer than it otherwise would be. Statement (II): In the Earth’s atmosphere, water vapour is one of the main greenhouse gases. 100. Ans: (b)





UPSC ESE(IES) 2018 GENERAL STUDIES(GS) QUESTION PAPER




http://esegeneralstudies.epizy.com


 


                                http://coursewhizz.com/


Sunday, February 17, 2019

UPSC ESE(IES) 2017 GENERAL STUDIES(GS) QUESTION PAPER


 





                                                           http://esegeneralstudies.epizy.com/


UPSC Engineering Services - 2017 (Prelims)
General Studies and Engineering Aptitude [ SET - A]
01. Which of the following methods are considered as most favourable to production organizations
liable for Taxation?
i. Straight line method of depreciation
ii. Declining balance method of depreciation
iii. Sum of the years digits method of depreciation
iv. Sinking fund method of depreciation
Select the correct answer using the codes given below:
(a) i and ii (b) ii and iii (c) iii and iv (d) iv and i
01. Ans: (a)


02. Consider the following statements regarding Repo rate:
i. It is the rate at which RBI lends money to Commercial Banks generally against Government
Securities.
ii. It is the rate at which RBI borrows money from Commercial Banks generally against
Government Securities.
iii. It is the rate at which Commercial Banks keep Deposits with RBI
Which of the above statements is/are correct?
(a) i only (b) ii only (c) iii only (d) i, ii and iii
02. Ans: (a)


03. Consider the following statements regarding GST:
i. The GST Bill 2014 has the purpose to improve the Value Added Tax on Goods and Services.
ii. It can be imposed differently in different States.
iii. It is a Comprehensive Tax imposed nationwide irrespective of any State concerned.
iv. It is a significant step in the reform of Indirect Taxation in India.
Which of the above statements are correct?
(a) i, ii and iii (b) i, ii and iv (c) ii, iii and iv (d) i, iii and iv
03. Ans: (d)


04.Vision of Digital India launched by the Government of India is centred on
i. Digital infrastructure as a utility only to senior citizens.
ii. Governance and Services on demand
iii. Digital Empowerment of every citizen
Which of the above statements are Correct?
(a) i, ii and iii (b) i and ii only (c) i and iii only (d) ii and iii only
04. Ans: (d)


05. The words ‘Satyameva Jayate’ inscribed below the base plate of the Emblem of India have been
taken from which one of the following?
(a) Mundaka Upanishad (b) The Rig Veda
(c) The Bhagavad Gita (d) Vaalmiiki’s Ramayana
05. Ans: (a)


06. Which one of the following Committees was set up by the Government of India in September 2014
to restructure the Railways and to suggest ways for resources mobilization?
(a) Bibek Debroy Committee (b) C. Rangarajan Committee
(c) Parthasarathi Shome committee (d) Sundar Committee
06. Ans: (a)


07. The Rotterdam Convention deals with
(a) Reducing nuclear weapon stock piles (b) Limiting the use of toxic chemicals
(c) Protecting the oceans (d) Banning of human clone experiment
07. Ans: (b)


08. A pentagonal prism is lying on HP on one of its rectangular faces. When it is cut by a section plane,
the largest possible section thereof has
(a) Five edges (b) Six edges (c) Seven edges (d) Eight edges
08. Ans: (c)


09. Consider the following tertiary treatment methods for treatment of waste water:
i. Ion-exchange method
ii. Reverse osmosis
iii. Chemical oxidation method
iv. Activated sludge process
Which of the above methods are correct?
(a) i, ii and iv (b) i, iii and iv (c) ii, iii and iv (d) i, ii and iii
09. Ans: (d)


10. If a thread is wound around a cone, starting from a point on the base, and brought back to the same
point, then the shortest possible length of the thread is equal to the
(a) Diameter of the base of the cone
(b) Slant height of the cone
(c) Largest chord of the development sector
(d) Length of the perpendicular from a corner of the development sector to the opposite edge
10. Ans: (c)


11. Three hundred Passengers are traveling in white, silver and black cars; each of these cars is carrying
6, 5 and 3 passengers, respectively. If the number of white and silver cars is equal and there is only
one black car, what is the total number of cars?
(a) 52 (b) 53 ( c) 54 (d) 55
11. Ans: (d)


12. The locus traced by a point moving along a pendulum from one end to another, when the pendulum
oscillates is
(a) A spiral (b) An involute ( c) A cycloid ( d) A helix
12. Ans: (a)


13. The present ages of 3 brothers are in the proportion 3 : 4 : 5. After 10 years the sum of their ages will
be 78. What are their ages now?
(a) 12, 16 and 20 (b) 15, 20 and 25 (c) 21, 28 and 35 (d) 24, 32 and 40
13. Ans: (a)


14. A total of 324 notes comprising of Rs.20 and Rs 50 denominations make a sum of Rs.12,450. The
number of Rs.20 notes is
(a) 200 (b) 144 ( c) 125 (d) 110
14.ans:(C)


15. Consider the following factors in making ethical judgement:
i. The motive from which the action springs
ii. The nature of the act itself, including the means adopted
iii. The resulting consequences
Which of the above factors are correct ?
(a) 1 and 2 only (b) 1 and 3 only (c) 1, 2 and 3 (d) 2 and 3 only
15. Ans: (c)


16. If a line is inclined to Vertical Plane and parallel to Horizontal Plane, then which of the following
statements is always correct?
(a) True Length = Plane Length (b) True Length = Elevation Length
(c) True Length < Plane Length (d) Vertical Trace of the line is above the XY plane
16. Ans: (a)
True length = Plan length


17. If the radius of a generating circle which is moving inside the directing circle is half of the radius of
he directing circle, the curve generated by a point on the circumference of the generating circle is
(a) A circle (b) An ellipse (c) A straight line (d) A spiral
17. Ans: (c)


18. If the development of the lateral surface of a cone is a semicircle, then
(a) The slant height of the cone < diameter of the base of the cone
(b) The slant height of the cone > diameter of the base of the cone
(c) The slant height of the cone = diameter of the base of the cone
(d) The slant height of the cone = radius of the base of the cone
18. Ans: (c)


19. Five Men can paint a building in 20 days, 8 Women can paint the same building in 25 days and 10
Boys can paint it in 30 days. If a team has 2 Men, 6 Women and 5 Boys, how long will its take to
paint the building?
(a) 12 days (b) 13 days (c) 14 days (d) 15 days
19. Ans: (d)


20. The Ethical skills are:
(a) Care of possessions, modesty, posture, self-reliance, tidy appearance
(b) Good behaviour, good manners, good relationships, good environment
(c) Attention, calmness, concentration, self-confidence, self-esteem
(d) Code of conduct, responsibility, efficiency, perseverance, punctuality
20. Ans: (d)


21. Rajiv spends 40% of his salary on food 20% on house rent, 10% on entertainment and 10% on
conveyance. If his saving at the month end are Rs. 2000, then his monthly salary is
(a) Rs 6000 (b) Rs 8000 (c) Rs 10,000 (d) Rs 12,000
21. Ans: (c)


22. A group of workers estimate to finish a work in 10 days, but 5 workers could not join the work. If
the rest of them finished the work in 12 days, the number of members present in the team originally
is
(a) 50 (b) 45 (c) 35 (d) 30
22. Ans: (d)


23. The solution of the system of equations x + y + z = 4, x - y + z = 0, 2x + y + z = 5 is
(a) x = 2, y = 2, z = 0 (b) x = 1, y = 4, z = 1
(c) x = 2, y = 4, z = 3 (d) x = 1, y = 2, z = 1
23. Ans: (d)


24. A cone is resting with its base on HP. A section plane parallel to VP cuts the cone. The section plane
is some distance away from the centre and does not pass through the apex. The true shape of the
section is
(a) Hyperbola (b) Rectangular Hyperbola
(c) Parabola (d) Rectangular Parabola
24. Ans: (b)


25. The minimum value of the function



 occurs at
(a) x = 1 (b) x = -1 ( c) x = 0 ( d)3
25. Ans: (a)



26.ans:(b)



27.ans:(c)



28.ans:(a)



29.ans:(a)



30.ans:(d)



31.ans:(a)


32. Consider the following statements:
i. The failure of many structures ii. Accidents on major highways
iii. Discharge of effluents which pollute rivers iv. Dangerous gas emissions
These are attributable to:
1. Improper design
2. Not adhering to proper maintenance
3. Lack of proper inspection and quality control during construction
4. Corruption amongst several concerned individuals
5. Lack of public concern
Select the most appropriate answer using the codes given below:
(a) 1, 2 and 3 only (b) 1, 2 and 4 only (c) 3, 4 and 5 only (d) 1, 2, 3, 4 and 5
32. Ans: (d)


33. Consider the following statements regarding Golden Ratio for positive integers
1. It is the ratio of difference of two numbers and the smaller number
2. It is the ratio of sum of two numbers and the smaller number
3. It is the ratio of the sum of two numbers and the larger number
Which of the above statements is/are correct?
(a) 1, 2 and 3 (b) 3 only (c) 2 only (d) 1 only
33. Ans: (b)


34. For which of the following sectors do comprehensive safety and health statutes, for regulating
Occupational Safety and Health (OSH) at work places, exist at present in India?
(a) Mining, Factories, Ports and Agriculture
(b) Factories, Mining, Agriculture and Construction
(c) Mining, Factories, Ports and Construction
(d) Factories, Ports, Agriculture and Construction
34. Ans: (c)


35. Consider the following statements regarding safety during demolition of the multi-storey building:
1. Demolition need not proceed storey by storey
2. Floor openings, not used for material chutes, should be enclosed with adequate guard rails
3. Before demolition starts all lath and loose plaster shall be stripped off throughout the building
4. Adequate and well-stiffened lateral bracing shall be provided for walls
Which of the above statements are correct?
(a) 1, 2 and 3 only (b) 1 and 4 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4
35. Ans: (d)


36. A clutch has to transmit 200Nm of torque. Assuming uniform pressure theory and the ratio of outer
to inner radii is 2.5, what are the radii for a uniform pressure of 2MPa with the coefficient of friction
of the liner material being 0.4?
(a) 35 mm and 50 mm (b) 20 mm and 50 mm
(c) 35 mm and 80 mm (d) 20 mm and 80 mm
36. Ans: (b)


37. Consider the goals of the safety policy of a company, at once designating also the responsibilities
and authority for their achievement:
1. Safety of employees and the public at large
2. Efforts to be made to involve all managers, supervisors and employees in the development and
implementation of safety procedures
3. Clearing of all caveats that may tell on keeping the morale of the employees high
Which of the above statements are correct?
(a) 1, 2 and 3 (b) 2 and 3 only (c) 1 and 2 only (d) 1 and 3 only
37. Ans: (a)


38. Which one of the following statements is correct in the development of lateral surfaces of solids?
(a) The development of a right cone is a triangle
(b) Triangulation is the recommended method in the development of a prism
(c) The development of the lateral surface of a right circular cylinder is a rectangle
(d) The elements of an elliptical cone are equal in length
38. Ans: (c)


39. A 15 kW motor drives a bar of boring machine of 30 mm diameter, twisting it through 0.01 radian, if
the shear stress induced is 48 MPa and compressive stress is 57 MPa, the length of the bar whose
G = 0.80 x 10^5 MPa is
(a) 400 mm (b) 350 mm (c) 300 mm (d) 250 mm
39. Ans: (d)


40. Consider the following statements regarding V-belt drive:
1. The groove angle of the sleeve is less than belt section angle
2. The efficiency of a V-belt drive is higher than that of a flat belt drive
3. The groove angle is so made that the belt gets wedged in the groove
Which of the above statements are correct?
(a) 1, 2 and 3 (b) 1 and 2 only (c) 1 and 3 only (d) 2 and 3 only
40. Ans: (c)


41. The purpose of a boring operation in relation to a drilling operation is to
(a) Drill a hole (b) Finish the drilled hole
(c) Correct the drilled hole (d) Enlarge the drilled hole
41. Ans: (d)


42. Which of the following types of power have to be pre-justified; and, when the need and occasion
arise, must very soon be post-justified?
1. Reward power
2. Coercive power
3. Legitimate power
4. Expert power
5. Referent power
Which of the above statements are correct?
(a) 1, 2 and 3 (b) 1, 2 and 5 (c) 2, 3 and 4 (d) 3, 4 and 5
42. Ans: (a)


43. Factors which govern the operating cost of an equipment are:
1. Purchase price of the equipment
2. Depreciation due to regular use
3. Cost of operation, maintenance and repairs
Which of the above statements are correct?
(a) 1 and 2 only (b) 1 and 3 only (c) 2 and 3 only (d) 1, 2 and 3
43. Ans: (c)


44. Consider the following statements with reference to maintenance and service of the product after
delivery to the customer:
1. Reliability analysis uses statistics of failures to estimate, understand and improve the
performance of the equipment and its maintenance
2. Reliability analysis records supports or guides the maintenance engineer in improving the
performance of the product under service
Which of the above statements is/are correct?
(a) 1 only (b) 2 only (c) Both 1 and 2 (d) Neither 1 nor 2
44. Ans: (c)


45. The most fundamental attribute of TQM is
(a) Drawing control charts (b) Having regular purposeful meetings
(c) Meeting ISO 9000 audit requirements (d) Direct involvement of top management
45. Ans: (d)


46. Internal audits are used to verify whether
1. Products conform to technical specifications
2. Quality management systems are effectively implemented
Which of the above statements are correct?
(a) 1 only (b) 2 only (c) Both 1 and 2 (d) Neither 1 nor 2
46. Ans: (c)


47. Which industrial waste is commonly used in construction industry?
(a) Fly ash (b) Slag (c) Sludge (d) Red oxide
47. Ans: (a)


48. If a square pyramid is freely suspended from one of the corners of its base, then the imaginary line
joining that corner with the centre of gravity of the pyramid will be
(a) Inclined at 60 degree with the vertical (b) Inclined at 45 degree with the vertical
(c) Inclined at 30 degree with the vertical (d) Vertical
48. Ans: (d)


49. The maximum percentage defects that a consumer may find definitely acceptable is called
(a) AOQL ( b) LTPD ( c) AQL ( d) AOQ
49. Ans: (c)


50. In which one of the following types of industrial activities does the problem of loading and
scheduling become more difficult?
(a) Single product continuous ( b) Multi-product continuous
(c) Batch production (d) Continuous process production
50. Ans: (c)


51. Ethical issues that can affect an Engineer’s professional and personal life are termed as
(a) Macro-ethics (b) Micro-ethics (c) Morals (d) Rights
51. Ans: (b)


52. The LEED and GRIHA:
1. Are green building rating systems 2. Issue energy compliance certificate
3. Refer to Global standards 4. Are Indian standards under finalization
Select the correct answer using the codes given below:
(a) 1 and 2 (b) 2 and 3 (c) 3 and 4 (d) 1 and 4
52. Ans: (a)


53. Consider the following statements regarding activated sludge process:
1. Industries prefer activated sludge process as it requires less space, does not produce obnoxious
odours and requires less time for waste water treatment compared to trickling filter
2. It requires skilled supervision
3. Biological treatment is enhanced because shock loadings are eliminated
Which of the above statements are correct?
(a) 1 and 2 only (b) 1 and 3 only (c) 2 and3 only (d) 1, 2 and 3
53. Ans: (d)


54. Consider the following statements regarding ozone:
1. It is continuously being produced and destroyed
2. It helps to sustain life on earth
3. It is formed in the atmosphere through photochemical reaction
Which of the above statements are correct?
(a) 1 and 2 only (b) 1 and 3 only (c) 2 and 3 only (d) 1, 2 and 3
54. Ans: (d)


55. Consider the following statements regarding solar energy:
1. To encourage the adoption of solar energy production, many State Governments and the Centre
have announced plans by way of buy back as well as subsidies for installation
2. Land acquisition of several hectares is a bottleneck in implementing this programme
3. Considerable R & D effort is needed to bring down the cost of P-V cells
Which of the above statements are correct?
(a) 1 and 2 only (b) 1 and 3 only (c) 1, 2 and 3 (d) 2 and 3 only
55. Ans: (c)


56. If the efficiencies of the boiler, turbine and generator are 85%, 45% and 95% respectively, then the
efficiency of the power plant is
(a) 75% (b) 45% (c) 36.3% (d) 28.7%
56. Ans: (c)


57. Which of the above statements are correct?
(a) The end product of fossil fuels is in the form of electrical energy
(b) Watershed protection increases the rate of surface run-off of water
(c) If timber is over-harvested, the ecological functions of the forest are improved
(d) Rivers change their course during floods and lots of fertile soils are lost to the sea
57. Ans: (a)


58. Consider the following statements concerning environmental pollution:
1. Nuclear explosions cause radioactive radiation
2. Earthquakes do not cause Tsunamis
3. Acid rain is not a major environmental issue
4. Air pollution has some impact on meterorology
Which of the above statements are correct?
(a) 1 and 2 (b) 2 and 3 (c) 3 and 4 (d) 1 and 4
58. Ans: (d)


59. The reasons for low rate of plastic recycling are:
1. Scrap plastic has little value because virgin material is rather cheap
2. Low density of plastic leads to high shipping and handling cost
3. Recycling leads to a very severe public health hazard
Which of the above statements are correct?
(a) 1, 2 and 3 (b) 1 and 2 only (c) 1 and 3 only (d) 2 and 3 only
59. Ans: (b)


60. Consider the following statements regarding internet of things (IoT):
1. IoT extends the communication via internet to all the things that surround us
2. IoT is M2M communication
3. IoT uses only wireless technology
4. The major objectives for IoT are the creation of smart environments/spaces and self-aware things
Which of the above statements are correct?
(a) 1 and 3 (b) 2 and 3 (c) 1 and 4 (d) 2 and 4
60. Ans: (c)


61. Consider the following statements regarding SMOG:
1. SMOG was coined during the 1950’s to describe a mixture of smoke and fog experienced in
London
2. The principal pollutants in London SMOG are particulates and sulphur compounds
3. The London SMOG occurs generally early in the morning on cold wet winter days
Which of the above statements are correct?
(a) 1, 2 and 3 (b) 1 and 2 only (c) 1 and 3 only (d) 2 and 3 only
61. Ans: (a)


62. Besides species diversity and ecosystem diversity, which of the following is included in the term
‘bio-diversity’?
(a) Genetic diversity (b) Climatic diversity (c) Cultural diversity (d) Lingual diversity
62. Ans: (a)


63. Consider the following statements regarding Holostore:
1. It is a device that reads and writes data in an optical form
2. It is a computer storage device
3. It refers to Institutions where holography is taught
Which of the above statements are correct?
(a) 1, 2 and 3 (b) 1 and 3 only (c) 1 and 2 only (d) 2 and 3 only
63. Ans: (c)


64. Qualities expected of the manager of a new project are:
1. Confidence of owner entrepreneur
2. Leadership quality and authority
3. Quick decision making
4. Awareness of jobs completed so far, bottlenecks being faced and funds availability
Which of the above statements are correct?
(a) 1, 2 and 3 only (b) 1, 3 and 4 only (c) 2, 3 and 4 only (d) 1,2,3 and only
64. Ans: (c)


65. The ‘Economic life’ of a building is considered to be at an end
1. When the net income from the building fails to justify its existence
2. When the building facilities become obsolete
3. When the capitalization rate becomes high
Which of the above statements are correct?
(a) 1 and 2 only (b) 1 and 3 only (c) 2 and 3 only (d) 1,2 and 3
65. Ans: (a)


66. In a company assembly line, assembling gear boxes, five workers are assigned tasks who take 10, 8,
6, 9 and 10 minutes respectively. The balance delay for this assembly line is
(a) 13.3% (b) 14.0% (c) 16.0% (d) 43.3%
66. Ans: (b)


67. What is an optimizing strategy?
(a) Strategy of choosing the best possible solution considering all parameters
(b) Strategy of choosing a compromise solution
(c) Strategy of choosing the least cost solution
(d) Strategy of choosing a solution on the basis of precedents
67. Ans: (a)


68. With reference to problem solving, fixation refers to
(a) Focused approach to problem solving
(b) Planned approach to problem solving
(c) Inability to see a problem from a fresh perspective
(d) Inability to comprehend the goals to be achieved
68. Ans: (c)


69. Concurrent engineering is implemented by involving a cross- functional team for design, production,
testing and operational work.
(a) During the project execution (b) Long before the project execution
(c) Towards the end of the project execution (d) After completion of the project execution
69. Ans: (b)


70. Consider the following statements regarding project management:
1. It is the process of attaining project objectives in a stipulated time to produce quantified and
qualified deliverables.
2. It is the art of bringing together the responsibilities, resources and people necessary to accomplish
the business goals and objectives within the specified time limitations and within the financial
grant
Which of the above statements is/are correct?
(a)1 only (b) 2 only (c) Both 1 and 2 (d) Neither 1 nor 2
70. Ans: (c)


71. What is the full form of GPP?
(a) Green Public Policy (b) Green Private Procurement
(c) Green Public Procurement (d) Green private Policy
71. Ans: (c)


72. Consider the following phases of project management:
1. Identification 2. Formulation 3. Appraisal 4. Implementation
Which of the above phases are relevant, sequentially?
(a) 1, 2 and 3 only (b) 1, 2 and 4 only (c) 3 and 4 only (d) 1,2,3 and 4
72. Ans: (d)


73. Phenol and formaldehyde are polymerized to a resultant product known as
(a) PVC (b) Bakelite (c) Polyester (d) Teflon
73. Ans: (b)


74. Consider the following statements concerning e-governance and technology:
1. Rich Site Summary (RSS) is not a very useful tool for working on Web-service technology
2. Myspace is one of the most visited networks in the world
3. Facebook.Com is not the most useful social networking site of choice for most students
4. Wiki- is a group collaboration software tool working on Web-service technology
Which of the above statements are correct?
(a) 1 and 4 (b) 2 and 4 (c) 1 and 3 (d) 2 and 3
74. Ans: (b)


75. Pnematic structures are:
1. Membrane structures
2. Stabilized by compressed air
3. Characterized by internal pressure being less than external pressure
4. Characterized by internal pressure being equal to or more than external pressure
Select the correct answer using the codes given below:
(a) 1,2 and 3 (b) 1,2 and 4 (c) 2 and 4 only (d) 1 and 4 only
75. Ans: (b)


76. Consider the following statements regarding water:
1. Water is a polar molecules
2. Water molecules align themselves in an electric field
3. Water molecules vary their alignment if the applied electric polarity changes with time
4. Water molecules align themselves in a magnetic field
Which of the above statements are correct?
(a) 1,2 and 3 only (b) 1, 2 and 4 only (c) 3 and 4 only (d) 1,2,3 and 4
76. Ans: (a)


77. Consider the following assumptions made while developing the ionic packing theory:
1. Cations and anions are spherical but these spheres are not hard
2. Cations are always smaller than anions
3. Each cation would tend to be surrounded by the maximum number of anions permitted by
geometry
4. Cations and anions do not touch each other
Which of the above assumptions are correct?
(a) 1 and 3 (b) 1 and 4 (c) 2 and 4 (d) 2 and 3
77. Ans: (c)


78. Consider the following statements:
1. Asphalt is a naturally occurring product having non-crystalline structure
2. Rock Asphalt occurs in limestones or sandstones
3. Tar is a residue left after distillation of crude oil
4. Resins in Asphalt provide the stickiness to the product
Which of the above statements are correct?
(a) 1,2 and 3 only (b) 3 and 4 only (c) 1,2 and 4 only (d) 1,2,3 and 4
78. Ans: (c)


79. Consider the following statements:
1. Baking soda is used in fire extinguishers
2. Quick lime is used in the manufacture of glass
Which of the above statements is/are correct?
(a) 1 only (b) 2 only (c) Both 1 and 2 (d) Neither 1 nor 2
79. Ans: (c)


80. In the case of ionic bonding, the molecule is stable as long as the number of bonding electrons is
(a) Equal to the number of anti-bonding electrons
(b) Less than the number of anti-boning electrons
(c) Greater than the number of anti-bonding electrons
(d) Equal to the number of anti-bonding neutrons
80. Ans: (c)


81. A resistor measures 4 ohm at 40 degree C and 6 ohm at 80 degree C. At 0 degree C the resistor will measure(in ohm)
(a) 1.5  ( b) 2 (c) 3 ( d) 4
81. Ans: (b)


82. Fatigue resistance of materials can be improved by:
1. Shot peening 2. Polishing the surface
Which of the above is/are correct?
(a) 1 only (b) 2 only (c) Both 1 and 2 (d) Neither 1 nor 2
82. Ans: (c)


83. Consider the following statements on ‘firewall’ used in computing systems:
1. It controls and monitors the data traffic flow between inside and outside network
2. It protects and secures the inside network from any outside network
3. It can be implemented in software or hardware or a combination of both
Which of the above statements are correct?
(a) 1 and 2 only (b) 1 and 3 only (c) 2 and 3 only (d) 1, 2 and 3
83. Ans: (d)


84. Consider the following as advantages of ICT tools in educational systems:
1. Increased capacity and cost effectiveness of the educational system
2. Achievement by target groups that had limited access to traditional education
3. Support for improvement of the quality and relevance of existing structures of education
4. Provision of links between various educational institutions for knowledge sharing
Which of the above statements are correct?
(a) 1, 2 and 3 only (b) 1, 2 and 4 only (c) 3 and 4 only (d) 1, 2, 3 and 4
84. Ans: (d)


85. How is the closeness or commonness of attitude, behaviour, trust and performance within the
organization designated?
(a) Cohesion (b) Morale (c) Communication (d) Leadership
85. Ans: (a)


86. Accessibility legislation is intended to
(a) Protect intellectual property
(b) Improve the usability of websites
(c) Make all websites easier to use for visually impaired people
(d) Improve access to services for disabled people in both the physical and the virtual worlds
86. Ans: (d)


87. PRAGATI is the acronym
(a) Pro-active governance and transparency in India
(b) Pro-active governance and timely implementation
(c) Primary governance for transparency in India
(d) Promoting and accomplishing governance with assured and timely implementation
87. Ans: (b)


88. The main goal of G2B (Government to Business) is
1. To increase productivity by giving more access to information
2. To lower the cost of doing business
3. To create more transparency
Select the correct answer using the codes given below:
(a) 1 and 2 only (b) 1 and 3 only (c) 2 and 3 only (d) 1, 2 and 3
88. Ans: (d)


89. In a software project, COCOMO (Cost Constructive Model) is used to estimate
(a) Effort and duration based on the size of the software
(b) Size and duration based on the effort of the software
(c) Effort and cost based on the size of the software
(d) Size, effort and duration based on the cost of the software
89. Ans: (a)


90. If a clock loses 5 seconds per day, what is the alteration required in the length of pendulum in order
that the clock keeps correct time?
(a)
4/86400 times its original length be shortened
(b)
1/86400 times its original length be shortened
(c)
1/8640 times its original length be shortened
(d)
4/8640 times its original length be shortened
90. Ans: (c)


Directions:
Each of the next Ten items consists of two statements, one labelled as ‘Statement (I)’ and the other
as ‘Statement (II)’. Examine these two statements carefully and select the answers to these items
using the codes given below:
Codes:
(a) Both Statement (I) and Statement (II) are individually true and Statement (II) is the correct
explanation of Statement (I)
(b) Both Statement (I) and Statement (II) are individually true but Statement (II) is not the correct
explanation of Statement (I)
(c) Statement (I) is true but Statement (II) is false
(d) Statement (I) is false but Statement (II) is true
91. Statement (I): Global warming is the cause for climate change
Statement (II): Ozone depletion will cause global warming.
91. Ans: (c)


92. Statement (I): Graph between potential energy of spring versus the extension or compression of the
spring is a straight line.
Statement (II): Potential energy of a stretched or compressed spring, is directly proportional to
square of extension or compression.
92. Ans: (d)


93. Statement (I): Fatigue failure is a stress which is lower than the yield strength of a metal.
Statement (II): Repeated straining lowers the yield strength.
93. Ans: (a)


94. Statement (I): Physical properties of composite materials are generally isotropic.
Statement (II): The stiffness of composite panel will often depend upon the orientation of the
applied forces and /or moments.
94. Ans: (d)


95. Statement (I): Environmental considerations are not necessarily the same as, or congruent with,
Ecological considerations.
Statement (II): Environmental considerations address more towards maintaining, whereas
Ecological considerations address more towards sustaining.
95. Ans: (a)


96. Statement (I): Manganese is always added to steels since it combines with the sulphur content to
form manganese sulphide.
Statement (II): If manganese is not added, iron sulphide which is not harmful for steel, would form.
96. Ans: (c)


97. Statement (I): Quality Circle is a method to bring Organizational Improvement through indulging
the workers.
Statement (II): The main aim of Quality Circle is self-development and mutual development of
grass root level employees.
97. Ans: (c)


98. Statement (I): Digital India is a program to transform India into a digitally empowered society.
Statement (II): Digital India is a program to institute smart cities.
98. Ans: (c)


99. Statement (I): Increased cloud cover will lead to warmer winters due to clouds reflecting more
intense solar energy.
Statement (II): Overcast cloud conditions result in decrease in the day-night temperature difference.
99. Ans: (d)


100. Statement (I): Engineers shall hold paramount the safety, health and welfare of the public while
performing their professional duties.
Statement (II): Engineers shall continue their professional development throughout their careers.
100. Ans: (b)  


                                      http://coursewhizz.com/

Related articles

Send message to us:

Name

Email *

Message *